Blog

ZIMAS: the city's parcel lookup, and what it tells you

Type an address into ZIMAS and the city shows the zone, plan designation, overlays and rent-stabilization status. How to read it and what to confirm elsewhere.

Ask a Los Angeles address three questions: what is this land allowed to become, what rules sit on top of that, and who is protected inside it? The city has a single web tool that answers all three in about a minute. It is called ZIMAS, the Zone Information and Map Access System, and it lives at https://zimas.lacity.org/. Real estate agents, architects, tenants, planners and curious neighbors all use it, and anyone who rents, buys or builds in the city should know how to read it.

ZIMAS is a map and a database. You type an address, and the map zooms to the parcel and opens a profile with tabs of information drawn from several city and county sources. It is not a legal determination, and it is not a substitute for a zoning-compliance letter, but it is the fastest starting point. This guide covers the search, the main fields and how to turn them into decisions.

Searching

The search box accepts a street address. You can also search by the Assessor's Parcel Number, the APN, a ten-digit identifier assigned by the County Assessor that appears on property tax bills, or by the city's own Parcel Identification Number. For a house you own, the APN is on your tax bill; see Reading a Los Angeles County property tax bill. For a property you are thinking of buying, the listing or the title company can supply it.

After the search, the map highlights the parcel. A button opens a profile, a long page organized into sections. The profile can also be printed or saved as a PDF, which is the form in which these reports get attached to loan applications, appeals and planning submissions.

The map carries many data layers, and it is easy to be overwhelmed. For most questions, the profile tabs are better than the map.

Reading the zone

The first thing people look for is the zoning designation, usually a string of letters, numbers and hyphens. It looks cryptic and has a simple structure.

  • The first letters give the use. R means residential, with a number or code indicating the density, such as R1 for single-family homes and higher numbers for multifamily. C means commercial, and M means industrial. Other codes cover open space, parking and agriculture.
  • The number after the hyphen is the height district. It sets how tall a building may be and how much floor area is allowed relative to the lot. Suffixes such as L, VL and XL indicate limited, very limited and extra-limited height rules.
  • Letters in parentheses or brackets are conditions. A (Q) means a qualified classification with conditions attached by the council; a (T) means a tentative classification. A bracket version means the conditions were adopted through a different process. These conditions can limit a use or require a design approval, and they are written out in an ordinance the profile links to.
  • Suffix letters add overlays. An O can indicate an oil drilling district, for example.

The profile names the zone in plain language near the code, and the zoning rules are in the Municipal Code. The Department of City Planning also explains the system on its site, including a zoning search page at https://planning.lacity.gov/zoning/zoning-search. The city has also been working on a rewrite of its zoning code, with a separate site for the project, so confirm which code applies to the parcel you are examining and use the department's pages to see how the transition affects it.

The general plan and community plan

Under California law, zoning must be consistent with a general plan. In Los Angeles, the general plan is carried out through 35 community plans, each covering a part of the city. ZIMAS lists the community plan area and the general plan land use designation, such as "Low Medium II Residential" or "Community Commercial." The designation describes the long-term intention for the land, while the zone describes what is allowed now. If the two differ, the property may be a candidate for rezoning, and a developer or a neighbor interested in change will notice it.

Overlays and specific plans

The most important section for anyone planning work is the list of overlays and specific plans. This is where ZIMAS says whether the parcel is inside:

  • A Historic Preservation Overlay Zone, which adds design review for exterior changes. West Adams: a walk through the historic districts explains how HPOZs work.
  • A specific plan, a custom set of rules for a corridor or district.
  • A Community Design Overlay or other design standards.
  • A hillside area, a coastal zone, a flood zone, a fire hazard severity zone or a seismic study area, such as a fault or liquefaction zone.
  • A transit-oriented community area, near rail stations, where incentives for housing may apply.

Each of these can add review, restrict height, or change parking requirements. Someone who buys a house to enlarge it and finds out only afterward that it is in an HPOZ or a hillside area will spend months on a review they could have planned for. Pulling a permit for a Los Angeles home project describes the permit process that follows.

The Housing section and rent stabilization

For renters and landlords, the part that matters most is the Housing tab. It indicates whether the parcel is covered by the Rent Stabilization Ordinance, the RSO. The Housing Department's guidance says the RSO generally covers rental units built on or before October 1, 1978, with some replacement units built after July 15, 2007. The department estimates about 650,000 units in about 118,000 properties are covered. The Housing section also shows other records, such as Ellis Act withdrawals, and whether the Just Cause for Eviction ordinance applies.

Here is how a renter uses it:

  1. Search the building's address in ZIMAS.
  2. Open the Housing tab and look at the RSO entry.
  3. Note the year the building was built, which appears in the Assessor section of the profile.
  4. If the entry and the year suggest coverage, read Is my apartment under the RSO? A step-by-step lookup and What 3 percent means: the Los Angeles Rent Stabilization Ordinance in 2026, then check the current allowed annual increase on the Housing Department's page. The department's tenant hotline, 1-866-557-7368, answers questions.

The profile is informational, and units can be exempt for specific reasons, such as being single-family homes or condominiums in some cases. For a firm answer, ask the department.

Case history

Another tab lists planning cases and environmental filings on the parcel, with case numbers. If a developer has applied for approval to demolish or rebuild, or if a property carries conditions from a past approval, they appear here, and the number lets you look up the case documents on the Planning Department's site. The permits section links to LADBS records for the property, including past permits and open cases.

A hypothetical walk-through

Say a buyer is considering a 1950s duplex in a hilly part of the city. The numbers below are made up to show the process.

  • Zone. ZIMAS shows an R2 zone with a limited-height district. The buyer notes that a duplex is a permitted use and checks the Municipal Code for the lot-coverage and setback rules.
  • Overlays. The profile lists a hillside area. That means grading, retaining walls and additions face more review, and the buyer asks a design professional about the rules before making an offer.
  • Fire zone. The property falls in a very high fire hazard severity zone, which affects brush clearance and building materials; see Brush clearance and defensible space: what LAFD inspects.
  • Housing. The building was built in 1952, and the Housing tab shows an RSO entry. The buyer now knows that rent increases for the tenants are limited by the ordinance and that eviction rules apply.
  • Next step. The buyer calls Planning for a zoning verification and LADBS for open permits and asks the title company to check the county's records. Each of those is an official source that can confirm what the map suggests.

What ZIMAS cannot tell you

  • It is not a legal determination. The map carries a disclaimer, and the profile may lag behind recent ordinances or amendments. For a binding answer on what is permitted, ask the Department of City Planning.
  • It does not show everything. Private deed restrictions, easements and homeowner-association rules are not in the city's data.
  • It does not show the building's condition. Unpermitted additions and code violations may not appear. LADBS records and an inspection are separate.
  • It uses the city's data. County matters, such as tax assessments, are better checked at the county Assessor, and school boundaries at the school district.

Common questions

Can I use ZIMAS to find the zoning of a lot next door? Yes. The search works for any address in the city, and the profile is public. Neighbors often look up an adjacent parcel when a construction sign goes up, and the case history tab shows which approvals have been requested.

What if two sources disagree? If ZIMAS and the county Assessor differ on something like the year a building was built, the Assessor's record is the county's data, and the building permit history is the city's. Ask LADBS or Planning for the controlling record.

What if the map shows no overlays at all? That is common for a typical residential lot in a flat part of the city. It means no special review applies beyond the base zoning, although the usual building permit process still does.

Does ZIMAS work on a phone? The site loads on mobile browsers, but the profile is long, so many people use a larger screen.

Using it well

A few habits make ZIMAS quick and reliable. Start with the profile rather than the map. Save the profile as a PDF with the date. Read the overlay list line by line. Cross-check the RSO result with the Housing Department. And before any decision that costs real money, such as a purchase offer or a construction contract, confirm what you see with the relevant department. For buyers, Buying property in Los Angeles: taxes, ULA and the closing steps outlines the larger process, and for renters, Finding an apartment in Los Angeles: neighborhoods, the RSO and what to check explains what to check before signing a lease. The agencies behind the data are described in Department of City Planning and Los Angeles Housing Department.

Related city government

Related guides

Latest on this topic