Blog

Is my apartment under the RSO? A step-by-step lookup

How to find out whether a Los Angeles rental is covered by the Rent Stabilization Ordinance, using ZIMAS and its Housing tab, build dates and the LAHD hotline.

Ask a dozen Los Angeles renters whether their apartment is covered by the city's rent control law and most will shrug. It is a basic question with real money attached. The answer decides how much the rent can rise each year, whether a landlord needs a reason to end a tenancy and which office hears a dispute. A lease does not settle it, and neither does a landlord's say-so. The city keeps a record for every parcel, and anyone can pull it up for free in about five minutes. Here is how, and what the result means.

What the RSO is

The Rent Stabilization Ordinance, shortened to RSO, is the city's local rent control law, run by the Los Angeles Housing Department, known as LAHD. Under the ordinance, covered rental units can have their rent raised only by an annual percentage the city sets. The ordinance generally covers rental units built on or before October 1, 1978, along with some replacement units built after July 15, 2007. According to LAHD, about 650,000 units in about 118,000 properties are covered, a large share of the city's rentals.

The date has a history of its own. A 1978 cutoff puts most of the city's older apartment buildings inside the law, including the courtyard buildings of Hollywood and the mid-century walk-ups of the Westside and the Valley, while most new construction falls outside. Those are the general rules. Exceptions exist, and the lookup below is how you find out whether yours applies.

Step 1: Find the address's parcel in ZIMAS

ZIMAS stands for Zone Information and Map Access System. It is the City Planning department's parcel lookup, at zimas.lacity.org, and it holds what the city knows about every lot: zoning, general plan designation, permits and, for rent control, a housing record. The tool is described in more detail in ZIMAS: the city's parcel lookup, and what it tells you.

  1. Open ZIMAS in a web browser.
  2. Type the street address into the search box and choose the match that appears. Use the property's street address, not the unit number.
  3. The map zooms to the parcel, and a set of tabs opens with data for that lot.

If the search does not find the address, try a nearby address on the same block, or search by the assessor parcel number, which appears on a property tax bill. The tool covers the City of Los Angeles only, so an address in Santa Monica, Culver City, West Hollywood or Inglewood will not appear. Those are separate cities with separate rent laws.

Step 2: Open the Housing tab

ZIMAS sorts its information into tabs, and the one that matters here is Housing. It lists the parcel's housing records, including whether it is subject to the RSO. Read it carefully. If the tab shows the property as subject to the RSO, the building is covered by the city's rent stabilization rules.

Beside that field the tab shows other data points that help explain the result, such as the year the building was built and the number of units, and the page links to related housing information. A build year of 1978 or earlier will often mean coverage, subject to exceptions; a later one usually will not.

Step 3: Read what the answer means

There are three possible outcomes.

  • Covered. The Housing tab shows the RSO applies. The annual rent increase is limited to the percentage the city sets each year. LAHD says the allowable annual increase is 3 percent for July 1, 2026 through June 30, 2027. A landlord who wants to raise the rent above that amount is not allowed to under the ordinance, apart from specific exceptions the housing department can explain.
  • Not covered. The building is newer than the cutoff or falls within an exception. State law still limits rent increases and requires notice. A 30-day written notice is required for increases under 10 percent.
  • Unclear. If the record looks wrong or incomplete, such as an incorrect build year or a missing unit, contact LAHD. The record can be corrected.

For a covered unit, the arithmetic is simple. Say a tenant pays $2,000 a month. A 3 percent increase is $60, so the new rent would be $2,060. The same 3 percent on a $1,500 apartment is $45, for $1,545. See what a 3 percent rent increase costs: a worked example for more worked examples.

Step 4: Check how the formula works

The way the city sets the annual percentage changed on February 2, 2026. The new formula is 90 percent of the average change in the Consumer Price Index, with a floor of 1 percent and a cap of 4 percent. Under the old rules the floor was 3 percent and the cap was 8 percent. Under the new rules no extra percentage is added for utilities, and the extra 10 percent once permitted for an additional dependent is no longer allowed. For the reasons and consequences, read The February 2026 change to the RSO formula: 90 percent of CPI, a 1 to 4 percent range, and for the broader law, What 3 percent means: the Los Angeles Rent Stabilization Ordinance in 2026. For the 2026-27 year, LAHD's published allowable increase is 3 percent, and it stays at that level from July 1, 2025 through June 30, 2027.

Step 5: Call LAHD if you need confirmation

The ZIMAS result is a record, and records contain errors. LAHD runs the program and keeps a hotline for tenants and landlords at 1-866-557-7368. Its office is at 1910 Sunset Boulevard, Suite 300, Los Angeles, CA 90026. Language assistance is available by phone at (213) 808-8808. The department's website at housing.lacity.gov has pages on the RSO and on renter protections. A call is the right step when a landlord disputes the ZIMAS result, when the record does not match your building or when you need to know how an exception applies.

Appeals of rent decisions in covered buildings go to the Rent Adjustment Commission, a city body that hears them. If you are weighing an appeal or a dispute, Your rights as a Los Angeles renter: RSO, notices and where to call gives the broader picture and A Los Angeles renter's checklist: notices, increases and where to call lists the notices and deadlines to know.

Common questions

My building was built in 1980. Is it covered? Generally not, because the cutoff is October 1, 1978. But a replacement unit built after July 15, 2007 on a site where covered units were removed can be covered. The Housing tab will show it.

My landlord says my unit is exempt. Some categories of housing fall outside local rent control, and state law carves out certain units, such as some single-family homes and condominiums. The exemption belongs on the record and in a landlord's notice; check ZIMAS and ask LAHD to confirm.

Does the lookup show my rent? No. ZIMAS shows the parcel's housing status, not what any tenant pays. For a registered covered unit, the city keeps its own records through the housing department.

I am looking for an apartment. Can I check before I sign? Yes, and it is a smart step. Look up the address in ZIMAS, read the Housing tab and ask the landlord about the building's status in writing. Finding an apartment in Los Angeles: neighborhoods, the RSO and what to check covers the rest of the search.

A checklist for the lookup

  • Have the full street address, with the ZIP code.
  • Open ZIMAS and select the parcel.
  • Open the Housing tab and read the RSO line.
  • Note the build year and the number of units.
  • Compare the record with your lease and the building itself.
  • Write down the date you checked, in case the record is later updated.
  • Call 1-866-557-7368 if anything is unclear.

This is general information and not legal advice. The city's rules and the state's rules both apply, and both have exceptions. LAHD, the Rent Adjustment Commission and a tenant-rights organization or attorney are the right places to turn for a decision about your own home. The department profiled in Los Angeles Housing Department is the starting point, and the City Planning department that maintains ZIMAS is described in Department of City Planning.

Two illustrations

These are hypothetical examples, not real buildings.

The courtyard building. Say a tenant lives in a two-story courtyard apartment building on a street of older stucco. The tenant looks up the address in ZIMAS, opens the Housing tab and sees a build year in the 1940s and a note that the parcel is subject to the RSO. The rent is $1,800. If the landlord proposes an increase for the period beginning July 1, 2026, the most the ordinance allows is 3 percent: $1,800 times 0.03 is $54, so the highest permitted rent is $1,854. A landlord who asks for $1,900 is asking for $100, more than the allowed amount, and the tenant can bring the notice to LAHD.

The new building. Say a tenant in a mid-rise built in 2015 looks up the address and finds that the parcel is not subject to the RSO. The city's rent stabilization cap does not apply, but the state's rules still do, including the notice requirement. A 30-day written notice is required for an increase of less than 10 percent. The tenant's remaining questions, such as what the lease says about increases, are for the lease and for state law, and the answer belongs with a tenant-rights organization or an attorney, not with a rule of thumb.

When to look it up

Run the lookup before you sign a lease, when a rent increase notice arrives, and whenever something about your building changes, such as a new owner, a sale or a renovation. The record may be updated over time, and a result from two years ago may not match today's. It takes five minutes, and writing down the date and saving a screenshot of the page is a sensible habit for any renter.

If you are researching a neighborhood before a move, remember that older buildings cluster in the oldest parts of the city. A search through the neighborhood entries, starting with Koreatown and Hollywood, shows the kinds of rental stock in places with many pre-1978 buildings.

Related city government

Related guides

Latest on this topic