Blog
How to read Caltrans QuickMap and the traffic camera map before you drive
What each layer of Caltrans QuickMap and the camera map shows on Los Angeles freeways, how to read incident markers, and a two-minute check before you leave.
Every Los Angeles driver has met the freeway that looks open on the map app and turns out to be standing still at the next interchange. The surest way to find out is to look at the road itself, and the state lets you: Caltrans QuickMap, an interactive map of California's highways, and a separate map of roadside traffic cameras. Both are free, both run in a browser, and neither wants an account. Read properly, they take about two minutes and tell you things a general navigation app often cannot, such as whether a lane is closed for a repair crew, whether a sign over the road is warning of a closure ahead, or whether a mountain highway is under chain controls.
What follows is a walk through what each layer is for and how to combine them before a drive in the Los Angeles area. Caltrans District 7 covers Los Angeles and Ventura counties, and the maps follow the state highway system, which includes every interstate and U.S. route in the region plus state routes such as the 134, 170 and Pacific Coast Highway.
Where to find them
The QuickMap address is https://quickmap.dot.ca.gov/, and the same service comes as a free phone app. The camera map the city links from its traffic page is https://cwwp2.dot.ca.gov/vm/iframemap.htm. Open both on a laptop, or keep QuickMap open and use the camera layer inside it. The Caltrans District 7 page at https://dot.ca.gov/caltrans-near-me/district-7 is the entry point for the district's news on closures and construction.
Trains and buses belong to a different agency. Metro publishes live service alerts at https://go.metro.net/alerts, and the airport sites carry flight status. QuickMap is about the road network.
The basic screen
QuickMap opens on a map of the state with the major highways in color. Zoom with the scroll wheel or a pinch on the phone, and switch layers on and off from the drop-down menu labeled Options. Layers that are on show up as small icons or colored lines. Because the map covers all of California, the first move is to zoom to your corridor. For a drive from the Valley to LAX that is the 405 through the Sepulveda Pass; for a trip from Downtown to the beach, it is the 10.
The layers do not all behave alike, so it pays to know what each shows and what it leaves out.
The layers, one at a time
Traffic speed
Colored lines overlay the highways to show current speeds, usually from green through yellow to red. This layer answers the plain question, "is it slow right now?" It does not say why. A red segment can be a crash, a lane closure, a broken-down truck or the regular afternoon crush.
Incidents
Incident markers show events that affect traffic. According to Caltrans' own help page, incidents involving closed lanes appear as orange triangle markers. Click or tap a marker and a pop-up describes what happened and, often, how many lanes are blocked. The information comes from the state's highway incident feed, so there is a lag between an event and its appearance. If a freeway is red and carries no incident marker, assume something has happened and has not yet been logged.
Lane closures
This layer shows active lane closures: the work crews and maintenance operations that take away a lane. Caltrans says it displays only closures that are currently active, not planned ones, and that the data files update about every five minutes. Planned closures are listed on a separate page that the QuickMap help links to; look there when you are planning a trip a few days out. A night closure for resurfacing, a weekend closure of a connector ramp and a daytime closure of a right lane for sign work are all examples.
Changeable message signs
Over many freeways in the region hang electronic signs that display warnings, estimated travel times, Amber Alerts and closure notices. The Message Signs layer shows a marker for a sign only when it is displaying a message; a blank sign does not appear. Click a marker and the pop-up gives the text as it reads on the sign. This is the layer to check when you want to know what other drivers are being told: "Ramp closed ahead" or "Delay 20 minutes to downtown."
Chain controls
In Los Angeles County most drivers meet chain controls only on mountain routes, such as the I-5 across the Grapevine north of the city and highways in the San Gabriel Mountains, but the Chain Controls layer matters if you are leaving the basin for a ski trip or a winter drive. It shows the active chain requirements on state highways. Caltrans sets the levels, and the rules for each are explained on the agency's pages.
Cameras
The Cameras layer puts camera icons at points along the highway, and clicking one opens a still image from that camera. Caltrans describes these as CCTV camera snapshots, so they are still images that refresh, not live video. The image is not a recording, and it will not show the moment a crash happened. It shows what the road looks like within the last short interval: whether traffic is moving, whether a lane is blocked, whether the roadway is wet, whether smoke or fog is cutting visibility.
Waze and other crowd-sourced data
QuickMap has added crowd-sourced traffic information from the navigation app Waze as an extra layer. It can show reports of crashes, hazards and police activity that official feeds have not yet logged, but it is user-reported, so treat a single report as a clue rather than a fact.
The camera map
The separate camera map, the one the city's traffic page links to, is a faster way to scan many locations at once. It places a camera icon at each location in a district, and each icon opens an image. For Los Angeles a useful pattern is to look at three or four cameras along your route: one near the start, one at the choke point you expect, one near the destination. If all of them show moving traffic, go. If one shows a stop, that is where to look next in QuickMap.
Reading the Los Angeles corridors
The traffic pages for the city list the places commuters check first: the 405 through the Sepulveda Pass, the 10, the 101, the 5 and the 110. A few habits follow.
- The Sepulveda Pass (I-405) is a single corridor through the Santa Monica Mountains with few alternatives. A crash there backs up traffic for miles in both directions. See The Sepulveda Pass and the 405: why Los Angeles traffic stories start there for how it works and why it is hard to fix.
- The 101 and the 134 run through Hollywood, Studio City and Burbank and pick up the spillover when the 405 or the 5 jams.
- Surface streets are not on QuickMap. If you leave the freeway to dodge a jam, you lose the data, so decide before you exit.
- Wet weather changes everything. In rain the cameras may show standing water on the roadway, and storm closures appear on the incident layer. See The rainy season in Los Angeles, month by month for what the season brings and Atmospheric rivers and flooding in Los Angeles for the flood-prone spots.
- Fire season brings closures on canyon roads and the coast highway. Pacific Coast Highway: the road that links Malibu, the Palisades and the beaches describes how that corridor is handled.
The two-minute check
- Open QuickMap and zoom to your route.
- Turn on Traffic speed and look for red.
- Turn on Incidents and Lane Closures and see whether the red has an explanation.
- Check Message Signs for warnings ahead of you.
- Turn on Cameras and open one or two along the route.
- If you are headed for the mountains, switch on Chain Controls.
- Decide whether to go now, wait, or take transit. Using Metro buses and trains: fares, caps and tapping explains the fare system if you choose the train.
What the maps cannot do
QuickMap is a snapshot of state-managed highways. It does not predict how long a jam will last, and it does not cover city streets, parking or the airport terminal curb. For flights, use the airport's own status page, and for Long Beach Airport, the city's flight status page. On the road, always follow the instructions of law enforcement, and never use a phone while driving. If you are the passenger, or you are parked, read the map as you like.
Maps are only as current as their data feeds, too. A closure that began a minute ago may not be on the screen. When the map and a sign over the road disagree, trust the sign and the officer waving you through.
Treat the whole exercise as a quick look out the window, not a forecast. It tells you what the road is doing now, and the road can change before you reach the on-ramp.
One last habit is worth building: look at the map even when you are not worried. The pattern of normal traffic on your commute, the places where it slows and the cameras that show your usual stretch at your usual hour all become a baseline. Then a red segment that should not be there stands out the moment it appears.